| ITS Deployment Evaluation

Lessons Learned: Vehicle Safety

239 unique lessons found.

Deploy Intersection Roadside Computers that Can Handle the Highly Demanding Pipeline for Real-time LiDAR Processing.

Date Posted: 02/24/2023 | Source Date:

Extended Development and Testing of Optimized Signal Control with Autonomous and Connected Vehicles

09/14/2021

Ensure Repair and Maintenance Skills for Advanced Driver Assistance Technologies are Being Taught in Automotive Courses and Consider a Warrant-of-Fitness Test for Safety-Critical Technologies.

Date Posted: 02/23/2023 | Source Date:

Use of in-vehicle technologies to assist with and encourage safe and efficient driving behaviour

08/01/2022

Complement LiDAR Technology with Sound-Based Radar Technology to Mitigate Weather-Dependent Braking and Stopping Issues for Fully Automated Shuttle Operation.

Date Posted: 01/30/2023 | Source Date:

Lessons learned from setting up a demonstration site with autonomous shuttle operation – based on experience from three cities in Europe

05/06/2022

Manage Deployment Risks Related to Connected Vehicle Technology Maturity by Reducing Exposure to External Uncertainties and Adding Testing at an Earlier Stage.

Date Posted: 12/28/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Independent Evaluation- Program Assessment

05/23/2022

Manage Public Expectations by Highlighting the Difference Between Connected Vehicles and Autonomous Vehicle Operations, as Found During the Tampa CV Pilot.

Date Posted: 12/20/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Independent Evaluation: Stakeholder Acceptance and User Satisfaction Evaluation— Tampa (THEA)

06/17/2022

Keep Sufficient Automated Shuttle Replacement Parts on Hand to Minimize Service Disruptions.

Date Posted: 12/20/2022 | Source Date:

First in Flight, First in Automation: NCDOT and NPS Pilot an Automated Shuttle at the Wright Brothers National Memorial

05/01/2022

Enable Real-Time Monitoring and Notifications for Mobile Pedestrian Application Data Stream Connections to Improve User Experience in Case of Data Transmission Failures.

Date Posted: 11/30/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Phase 3, Mobile Accessible Pedestrian Signal System (PED-SIG) – New York City Department of Transportation (NYCDOT)

12/29/2021

Implement a Quality Check Process with Active Participation by Agency Staff and Partnering with User Community for Detecting Inaccurate System-Generated Traveler Information Messages.

Date Posted: 11/30/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Independent Evaluation: Mobility Impact Assessment—Wyoming

06/19/2022

Local Validation and Evaluation of Pedestrian Detection Using Thermal Imaging Technology is Needed, Especially in Areas with Complex Traffic Conditions and Road User Activities.

Date Posted: 11/28/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Phase 3, Understanding and Enabling Cooperative Driving for Advanced Connected Vehicles in New York City – New York City Department of Transportation (NYCDOT)

12/29/2021

Deliver Firmware Updates and Configure On-Board Units (OBUs) Remotely to Improve Operating Efficiency and Minimize Trips to Connected Vehicle (CV) Equipment Service Centers.

Date Posted: 11/28/2022 | Source Date:

Connected Vehicle Pilot Deployment Program Independent Evaluation: Public Agency Efficiency Impact Assessment—Tampa (THEA)

04/06/2022