Design Tools & Models | ITS Deployment Evaluation

All: Design Tools & Models

Displaying 10 of 24 result(s).

Agencies that manage multimodal transportation corridors can use AMS methodology with ICM decision support systems to facilitate predictive, real-time, and scenario-based decision-making.

Content Type: Lesson | Date Posted: 06/21/2018 | Source Date:

Integrated Corridor Management Analysis, Modeling, and Simulation for the I-15 Corridor in San Diego, California: Post-Deployment Assessment Report

12/02/2016

Obtain working prototypes of CV applications from the USDOT’s Open Source Application Data Portal (OSADP) to prevent time spent doing duplicative software development

Content Type: Lesson | Date Posted: 12/19/2017 | Source Date:

Connected Vehicle Deployment Technical Assistance: Roadside Unit (RSU) Lessons Learned and Best Practices

05/01/2020

Recalibrate parking rate adjustment models when changes to parking policies and regulations may affect non-payment behavior.

Content Type: Lesson | Date Posted: 09/26/2017 | Source Date:

Demand-Responsive Pricing on the Cheap: Estimating Parking Occupancy Using Meter Payment Data

11/14/2015

Plan adequate time to calibrate Bluetooth readers to maximize accuracy and reliability.

Content Type: Lesson | Date Posted: 12/19/2014 | Source Date:

Mitigating Work Zone Safety and Mobility Challenges through Intelligent Transportation Systems: Case Studies

01/02/2014

Variable advisory speed limit (VASL) systems encourage drivers to slow down gradually as they approach rural work zones.

Content Type: Lesson | Date Posted: 04/29/2014 | Source Date:

Evaluation of Variable Advisory Speed Limits in Work Zones

08/02/2013

When developing transit signal priority (TSP) systems, consider using traffic simulation models as a cost-effective means of comparing the impacts of different TSP strategies on transit and non-transit vehicle travel time.

Content Type: Lesson | Date Posted: 01/10/2012 | Source Date:

Planning and Deploying Transit Signal Priority in Small and Medium-Sized Cities: Burlington, Vermont, Case Study

07/02/2010

Use Analysis, Modeling, and Simulation (AMS) to identify gaps, determine constraints, and invest in the best combination of Integrated Corridor Management (ICM) strategies.

Content Type: Lesson | Date Posted: 12/11/2009 | Source Date:

Integrated Corridor Management: Analysis, Modeling, and Simulation Results for the Test Corridor

09/02/2008

Implement standardized procedures for sharing, retrieving, and storing transportation data across the enterprise.

Content Type: Lesson | Date Posted: 09/26/2007 | Source Date:

Best Practices for Using Geographic Data in Transit: A Location Referencing Guidebook: Defining Geographic Locations of Bus Stops, Routes, and other Map Data for ITS, GIS, and Operational Efficiencies

04/01/2005

Ensure electronic toll collection systems are interoperable with neighboring toll facilities.

Content Type: Lesson | Date Posted: 06/28/2007 | Source Date:

Washington State Comprehensive Tolling Study: Final Report – Volume 2: Background Paper #8: Toll Technology Considerations, Opportunities, and Risks

09/02/2006

Develop best and worst case scenarios in order to be prepared in dealing with their consequences.

Content Type: Lesson | Date Posted: 03/21/2007 | Source Date:

TravInfo Field Operational Test Institutional Evaluation Final Results

12/02/1999