All: Requirements & Design

Displaying 10 of 240 result(s).

Local Validation and Evaluation of Pedestrian Detection Using Thermal Imaging Technology is Needed, Especially in Areas with Complex Traffic Conditions and Road User Activities.
Content Type: Lesson | Date Posted: 11/28/2022 | Source Date:
Improve the Validity of V2V Alerts with Better Accounting of Relative Elevation and Heading Between the Host Vehicle and Remote Vehicle, found by THEA Connected Vehicle Pilot.
Content Type: Lesson | Date Posted: 10/26/2022 | Source Date:
Confirm Up Front Whether the Technology is Production-Ready and Not Just in the Concept Phase When Working with Technology Vendors.
Content Type: Lesson | Date Posted: 10/18/2022 | Source Date:
Conduct Electromagnetic Compatibility Analysis When Retrofitting Transit Vehicles With Connected Vehicle Communications Hardware To Ensure They Can Perform as Configured in Their Intended Deployments.
Content Type: Lesson | Date Posted: 09/15/2022 | Source Date:
Video Cameras Equipped With Lens Cleaning Systems Are Universally Recommended To Help Winter Maintenance Vehicle Drivers Observe and Operate Plow Equipment More Safely and Effectively.
Content Type: Lesson | Date Posted: 09/16/2022 | Source Date:
A Dynamic Speed Feedback Sign (DSFS) is Most Effective at Reducing Vehicle Speeds on a Freeway Ramp When the Sign is Placed 250 Feet After the Start of the Ramp Curve.
Content Type: Lesson | Date Posted: 09/16/2022 | Source Date:
Use An Incremental and Iterative Development Approach to Facilitate Faster and More Efficient Data Exchange Platform Development.
Content Type: Lesson | Date Posted: 08/30/2022 | Source Date:
Improve Travel-Time Prediction Accuracy By Building Models Driven by Occupancy Information from Loop Detectors.
Content Type: Lesson | Date Posted: 08/24/2022 | Source Date:
Sending Train Location and Arrival Times to Automated Vehicles near Traversals on Highway-Rail Grade Crossings Can Prevent Potential Dangers.
Content Type: Lesson | Date Posted: 07/23/2022 | Source Date:
Opt for Quartz Weigh-in-Motion Sensors Rather than Traditional Piezo-Type Sensors for More Reliable and Accurate Data Collection.
Content Type: Lesson | Date Posted: 06/29/2022 | Source Date:
ITS Deployment Evaluation

1200 New Jersey Avenue, SE
Washington, DC 20590

its.dot.gov

U.S. Department of Transportation Office of the Assistant Secretary for Research and Technology (OST-R)
 
 
Web Policies and Notices | Careers | FOIA | Privacy Policy | Information Quality | No FEAR Act Data | Ethics
| Office of Inspector General | OIG Hotline | BusinessUSA | USA.gov | White House