All: High-Level Design

Displaying 10 of 168 result(s).

Include transit drivers in the development and testing of new collision avoidance technologies to help gain driver acceptance of these technologies.
Content Type: Lesson | Date Posted: 01/08/2018 | Source Date:
Deploy automated speed enforcement with dynamic "your speed" signs in work zones to heighten visual attention from drivers.
Content Type: Lesson | Date Posted: 01/08/2018 | Source Date:
Deploy reversible lanes on arterial streets to improve capacity in the peak direction, but note that it may yield higher collision rates.
Content Type: Lesson | Date Posted: 01/08/2018 | Source Date:
Use current SAE, IEEE, and NTCIP standards with systems engineering content to control architecture and design activities for a connected vehicle network.
Content Type: Lesson | Date Posted: 12/07/2017 | Source Date:
Use in-vehicle audible alerts in addition to visual safety alerts to improve speed limit compliance.
Content Type: Lesson | Date Posted: 10/09/2017 | Source Date:
Use Bluetooth sensors to improve detection of traffic stoppages in work zones where other non-intrusive portable traffic speed sensors may only report average speeds.
Content Type: Lesson | Date Posted: 10/09/2017 | Source Date:
Separately deploying mileage-based user fee and in-vehicle safety alert functions helps ensure each technology has the best opportunity for user acceptance.
Content Type: Lesson | Date Posted: 09/26/2017 | Source Date:
Conduct bench testing prior to field installation of transit signal priority (TSP) equipment to verify functionality between detectors, signal controllers, phase selectors, and cabinet design.
Content Type: Lesson | Date Posted: 09/26/2017 | Source Date:
Increase ownership of plug-in electric vehicles by minimizing the installation cost of electric vehicle supply equipment at major employment centers.
Content Type: Lesson | Date Posted: 09/20/2017 | Source Date:
Variable speed limit system site selection should be rigorous and incorporate analysis of existing speed profiles and roadway ingress/egress characteristics to assure proper spacing of VSL systems and sensor inputs.
Content Type: Lesson | Date Posted: 09/15/2017 | Source Date:
ITS Deployment Evaluation

1200 New Jersey Avenue, SE
Washington, DC 20590

its.dot.gov

U.S. Department of Transportation Office of the Assistant Secretary for Research and Technology (OST-R)
 
 
Web Policies and Notices | Careers | FOIA | Privacy Policy | Information Quality | No FEAR Act Data | Ethics
| Office of Inspector General | OIG Hotline | BusinessUSA | USA.gov | White House