Author
Wunderlich, Karl, James Bunch, and James Larkin
BCD ALL year
Benefit Summary HTML

This study examined the impacts of integrated advanced traveler information services (ATIS), advanced traffic management systems (ATMS), and incident management systems (IMS) on a mixed freeway/arterial corridor in north downtown Seattle. The regional and corridor level impacts of ITS were captured using the Mitretek Systems Process for Regional Understanding and EValuation of Integrated ITS Networks (PRUEVIIN). EMME/2 was used as the transportation planning model, and INTEGRATION-1.5 was used to generate simulations. The performance measures analyzed included the following: near-term peak period delay reduction, travel time reliability, changes in regional mode choice, corridor travel throughput, fuel consumption, and emission rates.

Measuring ITS impacts over a range of conditions was the key element to an accurate representation of annualized impacts. Accordingly, the simulation was exercised through a series of 30 scenarios. Each scenario represented a particular combination of weather impacts, travel demand variation, as well as variations in incident patterns and accidents. The scenarios were calculated from cluster analyses of traffic flow data (for variations in day-to-day travel demand) and weather/incident impacts (taken from historical archives). Each scenario had a probability of occurrence. The scenarios taken together comprised a representative year of operation.

The evaluation of ITS was broken down into a collection of four groupings: ATMS, ATIS, IMS, and Integration.

  • ATMS included projects that archived and consolidated arterial traffic data from a number of sources and compiled the information at a central location.
  • ATIS was comprised of a collection of pre-trip and en route information services that provided current congestion information based on real-time Washington State Department of Transportation (WSDOT) freeway detector data.
  • IMS attempted to improve detection, response time, and freeway system efficiency under incident conditions.
  • Integration contained only one project (ITS Backbone), which collect data from arterial sensors and integrated ATIS with traffic signal control. Both regional and corridor level simulations were used to evaluate the potential "big-picture" impact of integration on regional travel.

Each experiment was compared to a uniform baseline case representing long-standing traveler information services and traffic management systems in the Seattle corridor. For example, commercial traffic reporting and ramp metering control on I-5 were considered as elements of the baseline case.

Network efficiency impacts included data collected for all vehicles with trips starting in the north corridor between 6:15 AM and 9:00 AM.

Average delay was calculated as the difference between the average travel time in each scenario and free-flow travel times (50 percent of average demand, no accidents in the system, good weather).

Delay reduction was calculated by expressing the difference in average delay between the baseline case and the experimental case as a percentage of baseline average delay.

Throughput was determined by measuring the number trips started between 6:15-9:00 AM and ended before the end of the 9:30 AM peak period. Delay reduction and throughput measures were calculated for each scenario. An annualized figure was then calculated by computing a weighted average of across all scenarios.

System coefficient of variation was calculated by examining the variability of travel time for similar trips in the system taken across all scenarios. This statistic was considered an indicator of travel time reliability in the corridor.

Energy estimates were calculated as total liters of fuel consumed, total hydrocarbons (HC), Carbon monoxide (CO), and Nitrogen oxides (NOx) emissions. Virginia Tech used Link-level speed and stop data derived from simulations to calculate energy consumption and emissions during peak network activity.

Hyperlink Exit Door
No
Last Modified Date
Publication Sort Date
Publisher
Federal Highway Administration, U.S. DOT
Source ID
118
Title
ITS Impacts Assessment for Seattle MMDI Evaluation: Modeling Methodology and Results
UNID
50043F48F542B5BA852570BA0075D81D
Source Review
External URL Disclaimer

(Our website has many links to other organizations. While we offer these electronic linkages for your convenience in accessing transportation-related information, please be aware that when you exit our website, the privacy and accessibility policies stated on our website may not be the same as that on other websites.)